Applications :

Waterproof Coating:
• For waterproofing, mix Walltron Enhancer: Cement in the ratio 1:1 by volume
• Mix for 2-3 minutes to avoid air entrapment. Add cement slowly to Walltron Enhancer until the required consistency is achieved
• Apply 2 coats of the mix by brush in a span of 4-6 hours on the prepared concrete substrate
• Overlay the coating with a protective screed to the desired slope & thickness
Bonding Agent:
• For bonding primer coat of Walltron Enhancer mix Enhancer: Cement in the ratio 1:1 by volume
• Brush apply 1 continuous coat of the mix on the prepared concrete substrate
• Ensure to overlay the repair mortar when the bond coat is still tacky
Repair Mortars:
• Mix 5 kg of Walltron Enhancer in mixture of 50kg cement and 150kg sand along with 15-20 kg water to achieve workable consistency.
Overlay the repair mortar when the bond coat is still tacky.
Screeds & Concrete:
• Mix 5 kg of Walltron Enhancer in mixture of 50kg cement, 75kg sand & 75 kg aggregates (5-6mm)along with up to 15-20 kg water to achieve workable consistency .

TDS – Download